BR10i

Revision as of 15:44, 18 March 2011

ServeRAID BR10i SAS/SATA Controller

The ServeRAID-BR10i SAS/SATA Controller provides an ideal solution for all servers requiring solid performance with RAID 0, 1 and 1E capability. This RAID adapter provides investment protection by supporting SAS and SATA hard drive and tape drive configurations.

The ServeRAID BR10i has the following specifications:

   * Low-profile MD2 half-length 2U form factor adapter card
   * Two internal x4 SFF-8087 connectors
   * PCI Express x8 host interface
   * SAS Controller: LSI 1068e
   * 3 Gbps per port data transfer rate
   * Supports SAS 3 Gbps and SATA 2
   * Cache: None
   * uEFI support
   * Maximum stripe size: 64 KB (fixed)
   * RAID levels : RAID 0, 1, 1E

SataIII/6Gbps drives can be used on this controller, but need the LSI P19 Sata3 package minimum to be listed as 3.0Gbps Link speed in the adapter BIOS.

Firmware

IBM/Lenovo 2.66
Firmware: 1.27.86 (IR)
Bios: 6.26

IBM/Lenovo 2.68
Firmware: 1.27.88 (IR)
Bios: 6.26

IBM/Lenovo 2.72
BR10i (1068e)
Firmware: 1.30.05 (IR)
Bios: 6.30

LSI P19
Firmware: 1.31.00
Bios: 6.32
2 Versions available: SAS_1-5G_3G_6G_&_SATA_1-5G_3G and P19_Supports_SAS_1-5G_3G_6G_&_SATA_3G_6G

LSI P20
Firmware: 1.32.00
Bios: 6.34
2 Versions available: SAS_1-5G_3G_6G_&_SATA_1-5G_3G and P19_Supports_SAS_1-5G_3G_6G_&_SATA_3G_6G

Links

IBM Bios/Driver Page http://www.ibm.com/support/docview.wss?uid=psg1MIGR-65666