BR10i
ServeRAID BR10i SAS/SATA Controller
The ServeRAID-BR10i SAS/SATA Controller provides an ideal solution for all servers requiring solid performance with RAID 0, 1 and 1E capability. This RAID adapter provides investment protection by supporting SAS and SATA hard drive and tape drive configurations.
The ServeRAID BR10i has the following specifications:
* Low-profile MD2 half-length 2U form factor adapter card * Two internal x4 SFF-8087 connectors * PCI Express x8 host interface * SAS Controller: LSI 1068e * 3 Gbps per port data transfer rate * Supports SAS 3 Gbps and SATA 2 * Cache: None * uEFI support * Maximum stripe size: 64 KB (fixed) * RAID levels : RAID 0, 1, 1E
SataIII/6Gbps drives can be used on this controller, but need the LSI P19 Sata3 package minimum to be listed as 3.0Gbps Link speed in the adapter BIOS.
Firmware
IBM/Lenovo 2.66
Firmware: 1.27.86 (IR)
Bios: 6.26
IBM/Lenovo 2.68
Firmware: 1.27.88 (IR)
Bios: 6.26
IBM/Lenovo 2.72
Firmware: 1.30.05 (IR)
Bios: 6.30
LSI P19
Firmware: 1.31.00
Bios: 6.32
2 Versions available: SAS 1.5G, 3G, 6G & SATA 1.5G, 3G and SAS 1.5G, 3G, 6G & SATA 3G, 6G
LSI P20
Firmware: 1.32.00
Bios: 6.34
2 Versions available: SAS 1.5G, 3G, 6G & SATA 1.5G, 3G and SAS 1.5G, 3G, 6G & SATA 3G, 6G
LSI Versions have IT and IR options.
Links
IBM Bios/Driver Page http://www.ibm.com/support/docview.wss?uid=psg1MIGR-65666
IBM Guide Page http://www.ibm.com/support/docview.wss?uid=psg1MIGR-5084255
LSI Guide/Bios/Driver Page http://www.lsi.com/storage_home/products_home/host_bus_adapters/sas_hbas/internal/sas3081e-r/index.html